Glass Art Design Ideas – I’ve been lucky enough to travel to Hawaii a few times in my life, and one of my favorite parts of each trip is seeing the local plant life. When I visited Volcanoes National Park, I was very impressed by the Ohia Lehua trees, with their feathery red flowers on the branches of twisted leaves. I knew I needed to build a glass wall around them.
One of the things about the tree that really caught my eye is the way the leaves grow on each branch. I want my design to be simple to show the symmetry of the plant, while still being visible. Not surprisingly, this design idea led me directly to a composition reminiscent of the art movement. I’m always amazed at how design can play off the nature of botanical geometry, and I think I’ve captured some of that here.
Glass Art Design Ideas
I thought the flowers would look better as the glass added. I made them with different thicknesses of red string (glass beads) tied and sewn together in a neat way. In the past, when I planned to use the built-in parts in the wizard window, I found a method that worked well: My first step was to draw a complete blueprint as usual. When I start cutting the glass, I will only cut the pieces that are connected, slightly larger than the pattern shown. After mixing, the edges will usually be rounded, the shape will be slightly smaller. The amount of glass added will have some effect on the final result. Once I’m happy with the result of the blend, I place the pieces directly on top of the image and make the necessary adjustments before continuing as usual.
Glass Tile Tree Mosaic
For the leaves, I knew it was time to use a piece of green glass that I had been saving for the perfect project. Almost every stained glass painter I know has the colors they buy on a whim, out of sheer love of color. I think I probably bought this piece around 1999-2000, and I’ve only trimmed around the edges until now, so it’s good to have a place. With the bright green colors and the spiked end of the red string, it’s easy to find the best choice.
I am very happy with the finished piece! I don’t know when my schedule and budget will allow me to relax on the islands again, but for now, I’ll have a bright spot of color to keep them in my days.
Recently I took three windows from a local preschool. When they arrived at my office, more pieces of glass were missing, and the wires were twisted around. For this type of restoration project, my priority is to keep as much of the original material as possible, with as little work as possible to make it look good. First of all, the panels need to be redone, but the alumni group supporting the renovation wants to add something special. I made some sketches based on their ideas, and we decided to add a change to the top of the school, which is mainly shown in the middle class.
Since the three panels are the same, I was able to swap one of the front glass pieces from one panel to the other to replace the missing glass. I completely finished the center section and removed all the original glass where the new top would be placed. With good design, both sides can be restored with 100% glass and lead. Although the old lead was corroded it was smooth and good. I was able to carefully smooth and straighten the damaged parts and glue them back in place. The center section has been rebuilt with new lead and about 50% original glass, with new glass forming the top and rear sections all around.
Modern Raindrop Plant Stained Glass Leaves Pattern
I moved a piece of flashed glass to create the white circle detail in the crown. Electron glass contains two layers of paint – in this case blue on top of clear. The surface layer can be covered and selected by sandblasting, acid etching or with grinding tools. It’s a great way to combine two mirror colors in a subtle, detailed way, without adding too many lead lines. Letters and other images were painted and fired with vitreous paints.
This is a fun project, and I hope both students and teachers will enjoy it for years to come!
This week I fixed the lighting fixture. There were two major issues that needed fixing: Several pieces of glass broke and could fall out, and the top ring started to separate from the rest of the lamp. There is evidence – in the form of large flakes of solder – that someone tried to repair the ring in the past, but the attempt did not last long. After looking at the repair, I also advised the customer to use cool low temperature tires in the future, as hot work can accelerate the problems around the bulb.
My first step was to clean the glass lightly with a damp cloth and a soft toothbrush, just enough to remove the film work on the glass without removing the patina colors from the solder line. Cleaning the rest of the repair is easy and convenient and helps compare the replacement glass to the original glass. The first lampshades I repaired years ago had been sitting on a wall for decades collecting cigarette smoke. They got it
Amanda Woods Glass Art
In the nicotine residue, which causes the whole glass to turn yellow, and will stain the iron if not cleaned. Fortunately, most of the indoor lights I’ve made – including the one in this post – are well maintained and only require a simple cleaning before you start.
I picked up a piece of glass for the replacement parts, remembering that it is necessary to look carefully at the lamps that are compared and sent; that is, it should be comparable if the lamp is not lit. The next step is to start knocking out the broken pieces. Some of them were broken into small pieces that began to open. These are quickly removed by hand, twisting each piece. Others, though broken, are still intact. To remove them, I added a notch or two to the skin, made an X shape, and then tapped from the shadow to remove the pieces. Once the broken pieces were removed, I taped one of them to serve as a template, then cut and finished the new replacement pieces.
Before I could reinstall the parts, I had to clean up the areas where the old glass was left. I used my iron and x-acto knife to remove the old paper, being careful to leave the paper intact on the adjacent parts. Once the old paper is gone, I have nice clean holes to work with, and can easily insert the new parts. They were bought locally, and put together well after getting a new patina.
With the quad body in place I could move on to repairing the ring. On further reflection I saw that the ring had been pulled from the glass, most of the top layer of copper being torn off in the process. The original repairman just tried to use a lot of solder to seal the gap in the broken areas, and there was nothing strong enough to support the weight of the lamp. In the end, the old method just worked
Painted Bottles , Stain Glass Effect
Tearing off the sides of the candle. Serious work is required. First I opened the ring a bit by melting the old solder and put my knife in the small part to save what was left of the side of the original foil when I lifted the ring About 1/3 of the old cardboard is solid and usable. Now the shortcut is to run a paper around the rest of the circumference, which is covered with the wide side of the glass and provides a surface. I didn’t do it this way, because I didn’t think it would give it that staying power. Some pieces around the top were already loose, so I removed them along with a few other pieces (11 pieces), refilled them, and then bought another one. That way I could add much needed support without completely splitting the top row.
Glass yard art ideas, wall art design ideas, beach glass art ideas, fused glass art ideas, sea glass art ideas, art deco design ideas, nail art design ideas, art room design ideas, art design ideas, art and design ideas, glass art design minneapolis, shower glass design ideas